[joshtehaussie]

Ok, so I have a xenon (JTAGGED) but i'm needing to do a re-flow on the ram chips. I'm getting the (E20) error which is most common for cold solder under the ram chips so yeah.

the problem is the ram chips are extremely close to my jtag connections.

my question is if I un-solder my jtag points on the motherboard then re-flow the xbox360 ram chips then re-solder the points will I need to repeat the process of dumping the nand and adding the hacked image?



Thank you! hope you guys can give a good answer <3

[Sunkist]

No, you will not have to do the whole flashing process again.

[taintedkr0niik]

No. That's the most simple answer I can give.