[dontdr0ptheS0AP]

Updated to version
Dashlaunch v2.32 / FSD 2.2 r275

How to setup your Jtag to launch a different dash on start-up

Requirements

• Jtag with Xexmenu installed
• One of the following transfer methods: USB flash drive, FTP program, or Transfer cable
• FSD 2.2 r275
• Dashlaunch v2.32

Dashlaunch v3.0beta - I have not used this yet, but here it is if you want it.

Edit Your launch.ini

Locate the launch.ini

installer/launch.ini

Open launch.ini and use the following to setup which dashboard you want to load by default, simply copy and replace the setup to your liking. If you use the files I provided and change nothing it will load Freestyle dash by default.

Freestyle Dash

[QuickLaunchButtons]
BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0DE99990F586558
Default = Hdd:\Freestyle\default.xex
[Settings]
nxemini = true
pingpatch = true

Retail dashboard

[QuickLaunchButtons]
BUT_X = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0DE99990F586558
BUT_Y = Hdd:\Freestyle\default.xex
Default = 
[Settings]
nxemini = true
pingpatch = true

Xexmenu

[QuickLaunchButtons]
BUT_X = Hdd:\Freestyle\default.xex
Default = Hdd:\Content\0000000000000000\C0DE9999\00080000\C0DE99990F586558
[Settings]
nxemini = true
pingpatch = true

Transfer Files to your Jtag

USB flash drive TUT

Step 1
Download the links provided and place them on your USB flash drive, then move your USB flash drive to your Jtag and turn it on.

Step 2
Get to the xexmenu however you normally do.

When Xexmenu loads,

• press RB on the xbox controller
• press X
• select Usb0 and push A

Should look like this

Select Freestyle, press Y, select Copy and press A

Press X, select HDD1 and press A

Press Y, select Paste and press A

Press X, select Usb0 and press A

Select installer and press A

Select default.xex and press A

When it loads it should look like this, now press A

Wait until it finishes and Press A to shutdown

As a safety precaution, I unplugged the xbox for the back of the console for 10 secs, like when swapping keyvaults, plugged it back in and turned the xbox on. It should now boot into Freestyle Dash by default.

FTP program TUT

Step 1
Download the links provided and place them somewhere you have easy access to, I usually place them on the desktop.

Step 2
Open your FTP program (FlashFXP, FileZilla, ect..) and turn on your Jtag.

Locate the files you downloaded and connect to your Jtag, should look like this.

Double click on Hdd1

This is where you need to transfer the files to.

Single click on Freestyle

Click the Transfer icon

Single click on installer

Click the Transfer icon

Both folders should now be on your Hdd1, and should look like this.

You can now click the "Disconnect" icon and close the FTP program.

Step 3
Go to your Jtag and locate Hdd1

Select installer and press A

Select default.xex and press A

When it loads it should look like this, now press A

Wait until it finishes and Press A to shutdown

As a safety precaution, I unplugged the xbox for the back of the console for 10 secs, like when swapping keyvaults, plugged it back in and turned the xbox on. It should now boot into Freestyle Dash by default.

Updating FSD

This requires you to be connected to the internet, use an offline profile or disable connecting to live via the Family Settings.

Step 1
Enable Beta Updates, heres how.

Go to Utilities and select Settings

Select General Settings

Go over and scroll down and check Enable Beta Updates

Now when an update is available, you will get a message, like this

Step 2

When you get the message saying there is an update, go to Utilities and select Settings

Select General Settings

Select Updates

Select all available updates and click Y to apply updates

You should get a message saying Updates have been added to the download queue.

Let it download the updates, when it is finished a message will pop-up, select Restart FSD

When it reboots push Y

Let it install the updates and when it says it finished, press any button to reboot

It will say Restarting

Step 3

When it reboots, go to Utilities and select Settings

Select General Settings

select Reset Settings

select Reset Skin Settings

Select OK

Let it do its thing

It will restart your skin back to default and you will have all the updates.

Credits
dontdr0ptheS0AP, for the TUT
Team FSD, for Free Style Dash
cOz, for Dashlaunch
blackened dove, for the additional themes

[MODDERxX]

nice tut is there anything you need to do diff if your using aud_wiring?

[Ellie]

Very nice tut. Was easy to follow

[dontdr0ptheS0AP]

I added how to edit you launch.ini and the FTP transfer method.

Originally Posted by MODDERxX

nice tut is there anything you need to do diff if your using aud_wiring?

Thanks, not sure what you mean by "aud-wiring" though.

Originally Posted by Blue Eyes

Very nice tut. Was easy to follow

Thanks.

[dontdr0ptheS0AP]

I updated the OP to the latest Dashlaunch 2.10, FSD 2.0 rc 1.8, and blackened dove's theme.

[Rush]

Thanks for this!

[xEzi]

real nice TuT man !

[dontdr0ptheS0AP]

updated to Dashlaunch 2.11 and FSD 2.0 rc 2.1

[dontdr0ptheS0AP]

I had to re-upload all of the pictures(stupid photobucket), should be good to go.

[SmokyMiner]

Thanks so much really helped