[skatertg]

Just a quick tutorial on how to rebuild your original nand if you don't have it - will post one soon about extracting original nand from freeboot image/xbr ~ but you will need either LPT or USB nand extracter i think its called from team executer lawl

Basically you can rebuild a NAND to its original state. This will be especially useful for those who do not have their original NAND and want to upgrade from XBR3 to freeboot & also if you do not know how to do this you really shouldn't have a JTAG... just my opinion haha. My friend has tested this and it worked for a Falcon board.



Things you need:
Flash360. -> Free File Hosting Made Simple - MediaFire

Your CPU key (the one you get from Xell or Xellous not the donor's key).

To find your CPU KEY:

Have a camera ready to take a picture of the Fuse Set's that pop up briefly.
Take a picture that includes fuse set 3,4,5,and 6. These contain your CPU key. Or just wait until the end of xellous booting and it'll tell you your CPU key and DVD key ;D



Take either 3 and 5 or 4 and 6. This will make up your cpu key. 3=4 5=6 So for example. I will take 3 and 5.

3= E42D681ED06A6D1C

5= 1FFD8E48C56A2058


So my CPU Key is - E42D681ED06A6D1C1FFD8E48C56A2058


Adding either one of the two will make your CPU key.


After getting your cpu key you can write your original nand image back to the board. Or go straight forward and install XBReboot or freeBOOT.
^ copy and pasted part.

A NAND that matches your motherboard type with the 7371 kernel. You don't need their CPU key, any encrypted nand image will do.

360 Flash Tool download -> 360_Flash_Tool_v0.91.rar


Instructions:

Launch Flash360 and use it to dump your NAND.

Extract the kv.bin and config.bin with Nandpro2b with the following commands:

nandpro.exe flashdmp.bin: -r16 rawkv.bin 1 1

nandpro.exe flashdmp.bin: -r16 rawconfig.bin 3de 2

Then inject them into the donor NAND renamed "7371.bin" with the following
commands:

nandpro.exe 7371.bin: -w16 rawkv.bin 1 1

nandpro.exe 7371.bin: -w16 rawconfig.bin 3de 2

Open the orig.bin in 360 flash tool using your CPU key to make sure all the info looks correct.

Use the rebuilt NAND to make freeboot image.

Xenon NAND: MEGAUPLOAD - The leading online storage and file delivery service

Falcon NAND: MEGAUPLOAD - The leading online storage and file delivery service <- has 1 bad block



If anyone would mind donating a Nands with the dashboard kernel of 7371 preferably banned it would be helping other people out aswell =]

I have the Falcon and Xenon Nands already. But still need a Zephyr, Jasper 16, Jasper 256, and Jasper 512.

[Brad1128]

I have a Jasper 512 clean falcon Zephyr and too many Xenons

[skatertg]

Originally Posted by Brad1128

I have a Jasper 512 clean falcon Zephyr and too many Xenons

whats the dashboard before they were jtag'd? or are they not jtag'd - i didn't get what you meant by clean

[Brad1128]

You mean Kernel?
The Jasper has 7371
Xenon range
Zephyrs Range
Falcon Range
Tell me what you need.

[skatertg]

Originally Posted by Brad1128

You mean Kernel?
The Jasper has 7371
Xenon range
Zephyrs Range
Falcon Range
Tell me what you need.

welll i need the jasper 7371 and whatever zephyr it don't really matter i got falcon and xenon

[Brad1128]

jasper.rar
It has bad blocks. 3 dumps (9 Hours worth) prove that it's a good dump.

[skatertg]

Originally Posted by Brad1128

jasper.rar
It has bad blocks. 3 dumps (9 Hours worth) prove that it's a good dump.

Thanks <3... NO HOMO fawk

[Brad1128]

Dont say it press it fool

[Theone0522]

Is a zephyr jtag with freeboot.32 unbanned good? I run a fan about 1 6' feet wide on it to keep the heatsinks cool

[skatertg]

o_O zephyrs are ****e in my opinion and lolololol i got 5 extra fans hooked up to my 12v mod, its an aeroplane... no jk