Read Me I am not responsible for any damaged caused to your console. You are following this tutorial at your own risk. If read correctly, you will have no problems. Preparation
Download and extract
my package to your Desktop.
I have included Flash360. You should make a backup of your current NAND before continuing.
Browse to XeBuild/mydata and add your cpu key into cpukey.txt and save.
Paste a copy of your freeBOOT NAND into XeBuild\mydata and rename it to nanddump.bin.
My package will automatically include Dash Launch at your convenience. To change the path which loads it by default, please edit "launch.ini" in XeBuild. It is currently set up to boot the "FreeStyle" folder from a USB which is also included and I recommend using.
Installation
Shift Right Click the background of the XeBuild folder and click "open command window here" and type the following command with you required arguments (valid consoles listed below).
Code:
xeBuild -t <jtag/glitch> -c <console> -d mydata -f 14699 updflash.bin
Quote:
|
xenon/falcon/jasper/jasper256/jasper512/trinity
|
Hit enter and you should now see a similar output as below.
Send updflash.bin and $$ystemupdate to a FAT32 formatted device and plug into your console.
Now boot your console using the eject button if you currently have XeLL installed (it should find the update and start writing, then follow the on-screen instructions) or use the provided Flash360 (click write updflash to nand then keep current kv/config now ignore and continue and finally start; it should now start writing, once compelte, press back a few times until it turns off your console).
Start your console normally and you will be prompted by a official Microsoft update (this will install Avatar and Kinect data). This update is completely safe, it will ONLY create SysExt.
Optional
Place the folder "FreeStyle" onto your device that corresponds with the path your entered in "launch.ini" previously.
Final Comments
Congratulations! You have updated your console to 14699, installed Dash Launch, added Avatar/Kinect data and hopefully started using FreeStyle. Enjoy.
Have a problem? Please leave a reply, I will happily help any time I am not busy over Team Viewer.
If you find an mistake/error/typo with my post, please write on my wall!